RDAP Link: Report. Connect. No phone required!
When cell towers go down, the RDAP Link keeps your team connected. This rugged, pocket-sized LoRa mesh radio syncs directly with the RDAP Pro platform. It lets you send and receive messages and submit HEART Reports without a cell phone, cell service, or internet.
It runs on the license-free 915 MHz band and comes with a high-quality 915 MHz antenna for dependable range. Its LoRa radio is based on the Seeed Studio Wio-SX1262 module, built on the Semtech SX1262 chip, and supports the 862–930 MHz frequency range. It connects with other MeshCore radios, so each RDAP Link becomes part of a self-healing mesh network that relays communication from radio to radio across your community. A built-in L76K GPS receiver supports GPS, BeiDou, GLONASS, and QZSS for fast, accurate location in the field, and Bluetooth 5.0 lets you pair a phone when one is available. The radio is powered by a Nordic nRF52840 processor (ARM® Cortex®-M4 with FPU, up to 64 MHz) for efficient, low-power performance.
Messages and status are easy to read on the bright 1.3-inch OLED display, and the 4-way joystick, menu button, and alert buzzer make it simple to operate in any conditions. A 3,000 mAh battery provides long run time, and the USB-C power connection lets you recharge from a wall outlet, vehicle, power bank, or solar backup system. The water-resistant housing holds up in rain and rough field conditions, and the leather strap and steel clip attach it to a pack, belt, or vest.
The RDAP Link uses an FCC- and CE-certified radio module and RoHS-compliant components (FCC ID: 252181355/AA/00), and it’s built for CERT teams, churches, emergency managers, and prepared families, so the people who need help can still be heard when every other line of communication fails.
RDAP Link Features
-
No Phone Required: Send and receive messages on its own, with no cell phone, cell service, or internet.
-
Submit HEART Reports: Report status directly to RDAP Pro from the radio itself.
-
Syncs with RDAP Pro: Works seamlessly with the RDAP Pro web and mobile platform.
-
MeshCore Compatible: Connects with other MeshCore radios to send and receive messages across the mesh network.
-
LoRa Mesh Network: Powered by the Seeed Studio Wio-SX1262 module (Semtech SX1262) for long-range, low-power messaging that relays from radio to radio across your community.
-
Wide Frequency Support: LoRa radio supports 862–930 MHz.
-
915 MHz License-Free Band: Operates on the US 915 MHz band, with no radio license needed.
-
High-Quality 915 MHz Antenna: Built for dependable range and signal strength.
-
Multi-Constellation GPS: L76K receiver supports GPS, BeiDou, GLONASS, and QZSS for fast, accurate location.
-
Bluetooth 5.0: Pair a phone when one is available.
-
Nordic nRF52840 Processor: ARM® Cortex®-M4 with FPU, up to 64 MHz, for efficient, low-power performance.
-
1.3" OLED Display: Bright, easy-to-read screen for messages and status.
-
4-Way Joystick & Menu Button: Fast, intuitive navigation, even with gloves on.
-
Built-In Buzzer: Audible alerts for incoming messages.
-
3,000 mAh Battery: Long run time for extended emergencies and deployments.
-
USB-C Charging: Recharge from a wall outlet, vehicle, power bank, or solar backup.
-
Water Resistant: Handles rain, splashes, and wet field conditions (not submersible).
-
Rugged, Pocket-Sized Design: Textured housing built for field use.
-
Leather Strap & Steel Clip: Attaches securely to a pack, belt, or vest.
Materials & Care
Materials
- Housing: Durable textured polymer
- Antenna: 915 MHz antenna with metal connector
- Display: Built-in screen with protective window
- Carry System: Genuine leather strap with metal snap clip
- Hardware: Stainless steel fasteners
- Battery: 3,000 mAh rechargeable lithium battery
Care
- Wipe clean with a soft, damp cloth. Do not use solvents, alcohol, or harsh cleaners.
- Do not submerge in water or spray with high-pressure water.
- Make sure the USB-C port is clean and dry before charging.
- Charge only with a standard USB-C cable and power source.
- Hand-tighten the antenna only. Do not over-tighten or bend it.
- Keep the radio out of extreme heat, such as a closed vehicle in summer or direct sun for long periods, and away from open flame.
- For long-term storage, charge the battery to about 50–70%, store the radio in a cool, dry place, and top it off every 3 months.
- Fully charge before deployment or emergency use.
- Condition the leather strap occasionally to prevent cracking.
- Do not open the housing. Doing so may affect water resistance and void the warranty.
1-Year Limited Warranty
The RDAP Link is warranted to be free from defects in materials and workmanship for one (1) year from the original date of purchase. If your radio fails during the warranty period because of a manufacturing defect, we will repair or replace it at no charge.
This warranty does not cover:
- Water damage from submersion or high-pressure water
- Physical damage from drops, impact, crushing, or misuse
- Damage from opening, modifying, or repairing the device yourself
- Damage from unapproved chargers, cables, or power sources
- Normal wear, including cosmetic scratches, leather strap wear, and gradual battery capacity loss
- Lost or stolen devices
To make a warranty claim, contact us at admin@rdap-pro.com with your order number and a description of the problem. Proof of purchase is required. This warranty applies only to the original purchaser and is not transferable.
Shipping can take up to 30 days from date of order.